Here are some ideas and explanations to make some barriers to punctuate your streets and cities of the West.
For these 3 sections of fence, I used foam board stripped of its cardboard on both sides.
I've made holes to accommodate 3 pieces of wood to support all the woodwork.
They are hardwood and are stuck in the wall thickness. At this stage, it remains quite fragile.
After I fixed the horizontal cross-cut and then I cut the slats of the fence itself, balsa. The base is made of strong cardboard, coated with spackle, mixed with wood glue and flock sands of different diameters.
The tufts of grass are among
www.internationalmodels.net
Cases of rifles, various bundles, bags and
fund.
Nerds are Fimo or other waste entoilés pasted. The bags are
Fimo.
The 5 blue boxes of ammunition were carried out with small drops of foam board that I dress rectangle of balsa wood.
I started with the ends or balsa was pierced two small holes where I could put the handles made of over roast.
The ends of the wire will pass through the slots that I made in the thickness of the polystyrene they will generously embedded with glue.
I then glued the sides before putting the lid and the bottom, as balsa. After
for a good level of realism is the paint that makes the difference. Look well worn, preferably.
nice day.
0 comments:
Post a Comment